
# Copyright (c) 2000-2021 Synology Inc. All rights reserved.

[app]
app_name	=	"VPN Server"
description	=	"VPN Server offers an easy VPN solution that turns your Synology product into a VPN server, providing a secure method to connect to a private LAN at a remote location. All PPTP, OpenVPN, and L2TP/IPSec services are supported."
description_northstarplus	=	"*VPN Server has reached the end of its life span on Synology Router. We strongly recommend using VPN Plus Server to get access to future updates and technical support.* VPN Server offers an easy VPN solution that turns your Synology Router into a VPN server, providing secure connections to a private local network from anywhere. Supported VPN protocols include PPTP, OpenVPN, and L2TP/IPSec services."
displayname	=	"VPN Server"
management	=	"Manage VPN Service"
settings	=	"Set up VPN Server"

[common]
all	=	"All"
btn_refresh	=	"Refresh"
btn_save	=	"Save"
cbx_auth	=	"Authentication"
cbx_client_num	=	"Maximum connection number"
cbx_encrypt	=	"Encryption"
disable	=	"Disabled"
dont_alert_again	=	"Don't show this again"
enable	=	"Enabled"
enable_fail	=	"Activation failed"
field_clientip	=	"Client IP"
field_protocol	=	"Protocol"
field_status	=	"Status"
field_uptime	=	"Uptime"
field_username	=	"Username"
field_vpnip	=	"Dynamic IP"
max_conn_per_account	=	"Max connections of an account"
none	=	"None"
note	=	"Note"
text_client_range	=	"Client IP range"
text_ip	=	"Dynamic IP address"
unknown	=	"Unknown"

[conn]
btn_disconn	=	"Disconnect"
btn_info	=	"Get Info"
connection	=	"Connection List"

[general]
account_type	=	"Account type"
autoblock_link	=	"Set up "_AUTOBLOCK_""
cbx_interface	=	"Network interface"
chk_privilege_enable	=	"Grant VPN permission to newly added local users"
general_settings	=	"General Settings"

[l2tp]
chk_kernel_mode	=	"Run in kernel mode"
chk_service_enable	=	"Enable L2TP/IPSec VPN server"
chk_sha2_truncbug	=	"Enable SHA2-256 compatible mode (96 bit)"
confirm_preshared	=	"Confirm pre-shared key"
ike_auth	=	"IKE authentication"
l2tp	=	"L2TP/IPSec"
pswd_preshared	=	"Pre-shared key"

[log]
btn_clear	=	"Clear"
btn_export	=	"Export"
field_datetime	=	"Date & Time"
field_event	=	"Event"
field_type	=	"Type"
html_title	=	"VPN Server Log"
log	=	"Log"

[migration]
confirm_migration_msg	=	"VPN Server has reached the end of its life span on Synology Router. We strongly recommend migrating to VPN Plus Server to get access to future updates and technical support. Do you want to install VPN Plus Server and migrate the current configuration from VPN Server now?"
confirm_migration_note	=	"Note: VPN Server will be disabled. You can migrate its VPN service settings, user privileges, and logs to VPN Plus Server for use."
detect_vpnplus_msg	=	"If you still wish to use VPN Server, please disable VPN Plus Server at Package Center first to avoid configuration conflicts."
detect_vpnplus_warn	=	"If you want to return to VPN Server, disable VPN Plus Server at Package Center first to avoid configuration conflicts."
end_of_life_msg	=	"VPN Server has reached the end of its life span on Synology Router, and is no longer available in Package Center. You will not be able to download VPN Server again after uninstalling this package, and all existing configuration and logs will be removed. Please make sure you have migrated to VPN Plus Server first."
not_now	=	"Later"
recommend_vpnplus_confirm	=	"Are you sure you still want to install this package?"
recommend_vpnplus_msg	=	"VPN Server has reached the end of its life span on Synology Router. We strongly recommend using VPN Plus Server to get access to future updates and technical support."
uninstall_confirm	=	"Are you sure you want to uninstall this package now?"

[msg]
err_invalid_private_ip	=	"The specfied IP address is invalid. Please refer to Help for details."
err_ip_conflict	=	"This IP address is already used by another VPN server or network interface. Please use another one."
err_l2tpc_conflict	=	"L2TP server cannot be enabled. Please disable the active L2TP/IPSec connection at Main Menu > Control Panel > VPN, and then try again."
err_l2tpc_conflict_srm	=	"L2TP server cannot be enabled. Please disable the active L2TP/IPSec connection at "Main Menu" > "Network Center" > "Internet" > "VPN settings", and then try again."
err_openvpn_port_conflict	=	"This port is already in use. Please choose another port."
err_openvpn_svr_enable_failed	=	"Failed to enable OpenVPN. Please check the configuration file."
err_prefix_not_match	=	"The chosen prefix is no longer valid, please choose a valid prefix."
err_vpnc_conflict	=	"Please disconnect the active OpenVPN connection at "Main Menu" > "Control Panel" > "VPN", and then try again."
err_vpnc_conflict_srm	=	"Please disconnect the active OpenVPN connection at "Main Menu" > "Network Center" > "Internet" > "VPN settings", and then try again."
error_conn_exceed	=	"Maximum number of connections with same account should not exceed maximum connection number."
info_firewall_portforward	=	"Please check the port forwarding and firewall settings on your _DISKSTATION_ and router, and make sure the _PRTL_ port _PORT_ is open."
info_firewall_portforward_northstarplus	=	"Please check out the port forwarding and firewall settings of your network environment to ensure that the _PRTL_ port _PORT_ on _DISKSTATION_ can be accessed from the Internet."
info_firewall_portforward_plural	=	"Please check the port forwarding and firewall settings on your _DISKSTATION_ and router, and make sure the _PRTL_ ports _PORT_ are open."
info_openvpn_user_config	=	"OpenVPN configuration has been customized."
info_vpn_auth	=	"You can use the user credentials of the Synology NAS to establish VPN connection."
info_vpn_auth_northstarplus	=	"You can use the user credentials of the _DISKSTATION_ to establish VPN connection."
push_route_notify	=	"Please refer to Help for more information."
warn_domain_unavaiable	=	"The domain/LDAP server is unavailable."
warn_interface_change	=	"The network interface is not available now. The network interface for VPN service has been changed to an active one."
warn_interface_down	=	"The selected network interface is not available. Please use another one."
warn_kick_user	=	"Are you sure you want to disconnect this user's connection?"
warn_select_conn	=	"Please select one connection."

[openvpn]
authentication	=	"Authentication"
button_certexp	=	"Export Configuration"
chk_compress	=	"Enable compression on the VPN link"
chk_push_route	=	"Allow clients to access server's LAN"
chk_service_enable	=	"Enable OpenVPN server"
enable_ipv6_server	=	"Enable IPv6 server mode"
encryption	=	"Encryption"
err_cert_no_intermediate	=	"To enable {0} service, please import the corresponding intermediate certificate first."
info_port_443	=	"OpenVPN will use port 443 as the default port. Once OpenVPN is enabled, other services (e.g. Web Station) using port 443 will be disabled. Are you sure you want to continue?"
mssfix_option_value	=	"Mssfix option value"
openvpn	=	"OpenVPN"

[pptp]
chk_service_enable	=	"Enable PPTP VPN server"
enable_pptp_warn	=	"PPTP protocol offers a lower level of security. We recommend using another VPN protocol for better security. Do you still want to enable PPTP protocol?"
pptp	=	"PPTP"
pptp_dns	=	"Use manual DNS"
pptp_mtu	=	"MTU"

[privilege]
privilege	=	"Privilege"
search_user	=	"Search"
user_disabled	=	"Disabled"
user_normal	=	"Normal"
user_status	=	"Status"
user_unsupported	=	"Username unsupported"

[status]
btn_enable_service	=	"Enable service"
btn_select_if	=	"Select network interface"
current_conn	=	"Current connection"
overview	=	"Overview"
pkg_info	=	"Package Info"
pkg_version	=	"Version"
status	=	"Status"
text_ip_range	=	"IP range"
warn_interface_not_avail	=	"The selected network interface is not available now. Click (here) to select another one."

[wizard]
wizard_remove_db_desc	=	"All the data will be deleted with the removal of @PKG_NAME@ database."
wizard_remove_db_title	=	"Remove @PKG_NAME@ database"

