
# Copyright (c) 2000-2015 Synology Inc. All rights reserved.

[common]
commfail	=	"Connection failed. Please check your network settings."
loading	=	"Loading..."

[dual_boot_error]
boot_err_IF_count_not_match	=	"Please make sure you have the identical network adapters on both servers."
boot_err_enc_list	=	"Please confirm you have connected your expansion units to this server in the correct order."
boot_err_enc_sn_is_empty	=	"Incorrect serial number of the expansion unit."
boot_err_enc_validation	=	"Please confirm your expansion unit(s) have been connected to both servers in an identical order."
boot_err_local_host_sn_is_empty	=	"Incorrect serial number of this server. Please contact Synology support team for assistance."
boot_err_no_enc	=	"No expansion unit found."
boot_err_no_err	=	"Please rescan your local network with Web Assistant to connect to your high-availability cluster."
boot_err_no_hb_link	=	"Please confirm the heartbeat network is connected correctly."
title	=	"{0} ran into a problem"
title_solved	=	"Problems are solved"
unknown_error	=	"Unknown error"

[dual_passive_ui]
des_memory_error	=	"The memory size of this server is different from of the original active server."
des_net_error	=	"Errors occurred in the monitored network interface(s) of this server."
des_no_err	=	"Please go to find.synology.com to search for and connect to the active server."
des_recover_remote	=	"Click on the button to recover the other server."
des_service_error	=	"Errors occurred in the monitored service(s) of this server."
des_upgrade_comm_error	=	"Failed to connect to the unknown server. Please check the connections of the unknown server. (E.g. LAN, Heartbeat, expansion units)"
des_upgrade_net_error	=	"Failed to detect the other server via LAN and Heartbeat connections. Please check the LAN and Heartbeat connections to that server."
re_recover_remote	=	"Retry recovery"
recover_remote	=	"Recover"
recover_remote_failed	=	"Failed to recover the other server."
title_detect_third_remote_server	=	"Detected a new server"
title_fail_to_promote	=	"This server has encoutered an error, and failed to take over as the active server"
title_fail_to_upgrade	=	"Upgrade Failed"
title_recover_remote_success	=	"Recovery Complete"
title_recovering_remote	=	"Recovery in Progress"
title_unknown_error	=	"Unknown errors"
try_again	=	"Please try again"

[dual_recover]
desc	=	"Please click "Connect" to go to the active server, and add this server to the high-availability cluster."
desc_recover_by_passive	=	"Please click "Connect" to go to the passive server, and add this server to the high-availability cluster."
err_no_enc	=	"No expansion unit found."
err_title	=	"{0} ran into a problem"
install_desc	=	"Please click "Connect" to go to the other server, and proceed with the installation."
install_title	=	"Installation has started on the other server"
installing_desc	=	"Please wait for the completion of installation on the other server."
installing_title	=	"Installation in Progress"
redirect_to_active	=	"Connect"
redirect_to_passive	=	"Connect"
redirect_to_remote	=	"Connect"
remote_ip_not_found	=	"Failed to get the IP address of the other server. Please go to find.synology.com to search for the other server."
title	=	"This server is not in a cluster"
unknown_desc	=	"Please try again later."
unknown_title	=	"Failed to check the status of the other server"

[error]
boot_damaged	=	"The built-in installation file is corrupted. Please choose another type of installation."
err_dsconfig	=	"Failed to apply system configurations. Please install again later."
error_apply_lock	=	"Failed to apply your settings because another installation is in progress."
error_dir_nopath	=	"No DSM installation file is found. Please select the file again."
error_download	=	"Failed to download the DSM installation file. Please check the network connection and try again."
error_mkfs	=	"Failed to format the disk."
error_model	=	"You have to use the DSM installation file suited for {0}."
error_nochoosefile	=	"Please select a DSM installation file (.pat)."
error_nodisk	=	"Hard drive not detected. Please check if the hard drive is well connected to the motherboard."
error_recover	=	"The telnet service of your Synology NAS has been enabled for diagnosis. If you are still unable to re-install DSM, please configure your router and forward port TCP 23 to your {0}, and then contact the Synology support team for help."
error_unknown	=	"An error occurred during installation. The telnet service of DiskStation is turned on for error determination. Please configure your router to forward port 23 to DiskStation, and then contact Synology online support."
error_upload	=	"Failed to upload the DSM installation file. Please check the network connection and try again."
error_version	=	"You have to use an installation file of {0} or later."
no_space	=	"Available system space is insufficient."
recover	=	"Failed to perform system recovery on your DiskStation. Please go to the previous step and re-install DSM."
tcpip_ip_used	=	"The IP address has been used!"

[network]
netbkp_account	=	"Username"

[nodisk]
conn_again	=	"Connect Again"
dualhead_nodisk_disk_count_small_than_three	=	"Insufficient drives. Please install at least 3 SAS drives before trying again."
dualhead_nodisk_has_sata_disk	=	"Please check if only SAS drives have been installed in the expansion units, and no SATA drives are installed."
dualhead_nodisk_migrate_sys_disk_not_enough	=	"Detected a previously installed DSM on your Synology product. However, you have insufficient available SAS drives for system installation. Please install at least {0} new SAS drives before trying again."
dualhead_title_has_sata_disk	=	"Detected SATA drives on {0}"
dualhead_title_more_disks	=	"Insufficient drives on {0}"
nodisk_desc	=	"Please install hard disk(s) before reconnecting."
nosd_desc	=	"Please install micro SD card which is more than 4GB before reconnecting."
nosd_title	=	"No Micro SD Card Found on {0}"
sd_not_enough_desc	=	"Size of micro SD card is not enough, please install micro SD card which is more than 4GB before reconnecting."
sd_not_enough_title	=	"Micro SD card size on {0} is not enough"
title	=	"No Hard Disk Found on {0}"

[nvr]
apply_setting_upper	=	"Applying System Settings..."
close	=	"Close"
confirm_check	=	"I understand that all data on the hard disk {0} will be deleted when the installation begins."
confirm_desc	=	"Continue to install DSM will delete all data on the hard disk {0}. Are you sure that you want to do installation?"
confirm_install	=	"I understand that all data on my hard disks will be deleted when the installation begins."
install_surveillance_title	=	"Install NVR"
install_volume_title	=	"SHR and Volume Creation"
install_wait_SSPkg	=	"Installing Surveillance Station. Please wait..."
install_wait_sys_partition	=	"Establishing system partition. Please wait..."
install_waiting_no_reboot	=	"While you are waiting, visit {0} to learn more about the Surveillance Station running on your NVR."
ni_wait	=	"Your NVR will be ready soon. Please have a cup of tea..."
ok	=	"OK"

[status]
crash	=	"Configuration lost"
mem_testing	=	"Performing memory test"
migrate	=	"Migratable"
migrate_same_model	=	"Update Required"
recoverable	=	"Recoverable"
uninstall	=	"Not installed"
updating	=	"Upgrading"

[web_assistant_mobile]
eula_postfix	=	"End User License Agreement"
eula_prefix	=	"By clicking Install Now, you agree to the {0}."
web_asst_mobile_dhcp	=	"DHCP"
web_asst_mobile_diskstation_info	=	"Setup Password"
web_asst_mobile_dns	=	"DNS"
web_asst_mobile_err_cable	=	"Please connect the network cable to DiskStation."
web_asst_mobile_err_internet	=	"Cannot connect to the Internet."
web_asst_mobile_err_no_disk	=	"No disks found. Please turn off your DiskStation, install disks and then continue installation."
web_asst_mobile_err_nopat	=	"Failed to download DSM installation file. Please contact Synology support for help."
web_asst_mobile_err_patch	=	"Cannot download the installation file. Please try again later."
web_asst_mobile_err_pppoefail	=	"Failed to apply PPPoE settings due to incorrect account or password."
web_asst_mobile_formatting	=	"Formatting system partition..."
web_asst_mobile_gateway	=	"Gateway"
web_asst_mobile_hint	=	"All data will be cleared on the drives. Please back them up before proceeding."
web_asst_mobile_info	=	"After the installation, you will be redirected to the login page."
web_asst_mobile_ip	=	"IP address"
web_asst_mobile_netmask	=	"Netmask"
web_asst_mobile_next	=	"Next"
web_asst_mobile_password	=	"Password"
web_asst_mobile_pppoe	=	"PPPoE"
web_asst_mobile_rebooting	=	"DiskStation is rebooting, and your Wi-Fi connection will be disconnected. Please re-connect and enter the server name {0} in your browser."
web_asst_mobile_required	=	"Required"
web_asst_mobile_retype	=	"Retype password"
web_asst_mobile_setup_network	=	"Setup Network"
web_asst_mobile_shr	=	"Create RAID storage"
web_asst_mobile_start	=	"Tap Start to setup your DiskStation"
web_asst_mobile_startbtn	=	"Start"
web_asst_mobile_static_ip	=	"Static IP"
web_asst_mobile_status_download	=	"Downloading DSM installation file..."
web_asst_mobile_title	=	"Web Assistant"
web_asst_mobile_username	=	"User name"
web_asst_mobile_verify	=	"Verify"
web_asst_mobile_vtype_bad_dns	=	"The DNS address you entered is invalid."
web_asst_mobile_vtype_bad_gateway	=	"The gateway address you entered is invalid."

[welcome]
button_install	=	"Install"
button_migrate	=	"Migrate"
button_recover	=	"Recover"
button_reinstall	=	"Re-install"
button_setup	=	"Set up"
desc_crash	=	"DSM on your {0} has been reset so you are required to re-install DSM."
desc_install	=	"Set up your Synology {0} now!"
desc_mem_test	=	"Your {0} is performing memory test so you cannot install DSM now. Please try again later."
desc_migrate	=	"We've detected that you had moved the hard drives from {0} to {1}. You can migrate your data and settings to your new Synology NAS now."
desc_migrate_same_model	=	"We've detected that the hard drives of your current {0} had been moved from a previous {0}, and installing a newer DSM is required before continuing."
desc_oops	=	"Errors occurred on your {0}. Please contact the Synology support team for help."
desc_recover	=	"We've detected that you had moved the hard drives to a new {0}. Please click Recover if you want to recover your data and settings now."
desc_updating	=	"Installing DSM on your {0}."
device_info	=	"Device Info"
title_oops	=	"Oops!"
title_welcome	=	"Welcome!"
title_welcome_back	=	"Welcome Back!"
warning_ro_cache	=	"Read-only SSD cache on the hard drives of your previous {0} will be removed after the installation."
warning_rw_cache	=	"Read-write SSD cache has been detected on the hard drives. To prevent data loss, please remove the SSD cache on your previous {0} before the installation."
warning_sata_port_disabled	=	"We've detected errors on the hard drives ({0}), and the SATA ports have also been disabled. Please shut down your {1} to replace or remove the hard drives and try again."

[wizard]
4kn_disk_desc	=	"The following hard drives are 4K native HDDs and are not supported on your DSM version: {0}"
admin_acc	=	"Administrator account"
apply	=	"Applying..."
apply_step_desc	=	"Your DiskStation will be ready in approximately 10 minutes. Please wait, and do not turn off the power during this procedure."
apply_step_desc_v2	=	"Your DiskStation will be ready in approximately 10 minutes. Please do not turn off the power during the procedure."
apply_step_title	=	"Installing DiskStation Manager"
boot_chk	=	"Verify built-in DSM"
boot_patch	=	"Install built-in DSM"
clean_install	=	"Clean installation: keep my files only"
clean_install_info	=	"Keep my files, whereas all settings and data will be restored to default."
conf_exit	=	"{0} has not finished. Are you sure you want to exit?"
create_shr	=	"Create a Synology Hybrid RAID (SHR) volume after installation"
download_patch	=	"Download and install the latest DSM (recommended)"
download_patch_v2	=	"Install the latest DSM for new features and security fixes."
download_warn	=	"No Internet connection on {0}"
dsconfig_step_desc	=	"Please set password and server name."
dsconfig_step_title	=	"Enter DiskStation Info"
dualhead_format_all_disk_question	=	"All data on the drives will be deleted during the installation. Are you sure you want to continue?"
erase_disk_desc	=	"All data on the hard drive(s) {0} will be deleted."
err_patch	=	"Failed to install the file. The file is probably corrupted."
error_filename	=	"You have selected a file with incorrect extension. Please make sure the file extension is ".pat" which is not case-sensitive."
error_step_desc	=	"Please launch <a href={0} target='_blank'>Synology Assistant</a> or go to <a href {0} target='_blank'>Web Assistant</a> search page to reconnect."
error_step_title	=	"Failed to Connect"
eula	=	"By clicking Install Now, you agree to the <a href='http://www.synology.com/company/terms_conditions#tabs_terms_EULA' target='_blank'>End User License Agreement</a>."
format_hd_confirm	=	"I understand that all data on these hard disks will be removed."
format_hd_question	=	"All data on the hard disk(s) {0} will be removed during installation. Are you sure you want to proceed?"
hint_default_pwd	=	"If this web page is unexpectedly refreshed or closed, please log into your {0} again as "admin" and leave the password blank."
info_step_desc	=	"Please ensure you have backed up hard drives before installing."
info_step_desc_usb_station	=	"Please ensure you have backed up micro SD card before installing."
info_step_title	=	"Welcome to your DiskStation"
info_step_title_usb_station	=	"Welcome to your {0}"
install_now	=	"Install Now"
launch_web_assis	=	"Search Manually"
migrate_step_desc	=	"A previous DSM installation is found on the hard disks of your DiskStation. Choose your action from the below options."
migrate_step_desc_usb_station	=	"A previous DSM installation is found on the hard disks of your {0} and it ran into a problem while migrating to the new DSM installation. Choose your action from the below options."
migrate_step_desc_v2	=	"A DSM installation on your previous {0} is found on the hard drives of your current DiskStation. Choose your action from the below options."
migrate_step_title	=	"Select Installation Type"
net_set	=	"Applying network settings"
note	=	"Note:"
password_confirm	=	"Confirm password"
password_create	=	"Create password"
patch_step_desc	=	"Always install the latest DSM to optimize performance."
patch_step_subtitle	=	"DSM is the operating system running on Synology NAS."
patch_step_title	=	"Install DiskStation Manager (DSM)"
pppoe_password	=	"Password"
pppoe_username	=	"User name"
recover_now	=	"Start System Recovery"
recover_start	=	"Repair System"
redirect_fail	=	"Failed to connect to DSM login screen. Please search your DiskStation using Synology Assistant."
serial_num	=	"Serial Number"
server_name	=	"Server name"
status_download	=	"Downloading"
status_format_data	=	"Formatting drives"
status_format_sys	=	"Formatting system partition"
status_install	=	"Installing DiskStation Manager"
status_reboot	=	"Restarting your DiskStation..."
status_start	=	"Initializing"
status_upload	=	"Uploading DSM installation pack"
suggested	=	"(recommended)"
system_migration	=	"Migration: keep my files and most of the settings"
system_migration_info	=	"Keep the files and most of the settings of the previous DSM installation. Please note that some data and settings will still be lost. For detailed information, refer to <a href={0} target='_blank'>System Migration Tutorial</a>."
timer_unit	=	"seconds"
to_download_patch	=	"Install the latest DSM"
to_upload_patch	=	"Manual Install"
upgrade_reb	=	"Completing installation"
upload_info	=	"The .pat file can be found on the installation disc which comes with your product or on the <a href='http://www.synology.com/support/download.php' target='_blank'>Synology website</a>."
upload_patch	=	"Install DSM from my computer or installation disc"
upload_patch_v2	=	"Download from <a href='{0}' target='_blank'>Synology's Download Center</a>."
upload_select_file	=	"Browse"
waiting_desc	=	"After the installation is complete, you will see the login screen of your DiskStation. You are welcome to visit {0} to learn more about DiskStation Manager."
warn_erase_disk	=	"Note: All data on the hard drive(s) {0} will be deleted."
warn_erase_sd_card	=	"Note: All data on the micro SD card will be deleted."
warn_shr	=	"Note! All data in the hard drive(s) will be deleted while creating a SHR volume."

